Korea slime drying production line

Introduction of successful cases

This production line is a customized slime drying production line, the material has a certain viscosity, and the heat source is steam, so our company has designed such a production line in detail for the customer.

After the wet material enters the drying drum, it is divided into the following working areas: First, the material guide area, the wet material mud enters this area and contacts with the high-temperature hot air to quickly evaporate the water, and the material cannot form a bond when the material is moved by the large-angle guide plate. Then it is led into the next working area; the second is the cleaning area, where the wet material is picked up by the copy board to form a material curtain state. , the cleaning device can reasonably clean the materials adhered to the inner wall. In this process, the cleaning device also plays a role in crushing the agglomeration of the material balls, thereby increasing the heat exchange area and improving the drying rate. In the plate area, the wet slime is in a loose state with low moisture content, and the material has no bonding phenomenon in this area. After sufficient heat exchange, the material reaches the required moisture state and enters the discharge area; the fourth is the discharge area. , the drum does not have a copy board in this area, and the material rolls and slides to the discharge port in this area to complete the entire drying process.

Customer Reviews:

The drying effect is very good. Our production line has been running stably for a year. Thanks to the engineers of Shunzhi Machinery for helping us design such a production line.