Sawdust Dryer

  • Installation Slope

    3-5(%)

  • Max Intake Air Temperature

    700-800(℃)

  • Power

    7.5-160(kw)

【Processing Material】Various ores, slag, coal slime, desulfurization gypsum, etc.

【Scope Of Application】Mainly used in mineral processing, building materials, metallurgy, chemical and other departments to dry materials with a certain humidity or particle size.

Product Introduction

015.png

Equipped with biomass fuel hot air stove, high degree of automation, good quality of drying products, safety fire protection device installed in the drying system, hot air waste heat utilization and other devices.

When the chips enter the wood chip dryer, the blowing pipe and the rotating cylinder act together. The material is boiling and fluidized in the cylinder, and the hot air fully touches the material to complete the drying.

Performance Advantage

1. The drying strength is large. Because the material is highly dispersed in the airflow, the entire surface area of the particles is extremely dry and effective.

2. Short drying time.

3. The air dryer has a simple structure, a small area, and is easy to construct and maintain.

4. Large processing capacity and high thermal efficiency. When the unbound water is dried, the thermal efficiency can reach more than 70%.

Equipment Pictures

012.png

Customer Site

013.png

Technical Parameter

Specification(mCylinder volumeCapacityInstallation slopeMax intake air temperatureMain motorTotal weight
(Diameter x Length)t/h%(℃)kwt
Φ1.2×8.091.9-2.43-5700-8007.59
Φ1.2×1011.32.4-3.03-5700-8007.511
Φ1.5×1221.24.5-5.73-5700-8001518.5
Φ1.5×1424.75.3-6.63-5700-8001519.7
Φ1.5×1526.55.7-7.13-5700-8001520.5
Φ1.8×1230.56.5-8.13-5700-80018.521.5
Φ1.8×1435.67.6-9.53-5700-80018.523
Φ2.2×1245.69.7-12.23-5700-8002233.5
Φ2.2×1453.211.4-14.23-5700-8002236
Φ2.2×1660.813.0-16.23-5700-8002238
Φ2.4×1463.313.5-16.93-5700-8003745
Φ2.4×1881.417.4-21.73-5700-8003749
Φ2.4×2090.419.3-24.13-5700-8004554
Φ2.4×2299.521.2-26.53-5700-8004558
Φ2.6×24127.427.2-34.03-5700-8005573
Φ3.0×20141.330.1-37.73-5700-8007585
Φ3.0×25176.637.7-47.13-5700-8007595
Φ3.2×2520142.9-53.63-5700-80090110
Φ3.6×2828560.8-76.03-5700-800160135
Indirect heat transfer dryer
Cylinder diameter × Cylinder lengthInner diameter of outer cylinder (mm)Inner cylinder inner diameter (mm)Cylinder length (m)Cylinder volume (m³)Cylinder slopeLifting plate typeMaximum intake air temperature (℃)Dimensions (m)
Φ1.5×15m15005001520.273-5%lift type85016.2×2.7×2.7
Φ1.5×17m1722.9718.2×2.7×2.7
Φ1.5×19m1925.6820.0×2.9×2.9
Φ1.8×21m18006502135.913-5%lift type85022.5×2.7×2.7
Φ1.8×23m2339.3324.5×2.9×2.9
Φ1.8×25m2542.7526.5×2.9×2.9
Φ2.2×21m22008002158.13-5%lift type850----
Φ2.2×23m2363.61
Φ2.2×25m2569.15


Related Articles More >>

More models can also contact us, support customization

Customized service process

01

Advisory Service
All you need is a phone call and leave the rest to us

02

Understand Needs
The sales team will talk to you and tell us your needs

03

Planning and Design
Professional engineers give reasonable solutions according to your needs

04

Manufacturing
We will complete the quality and quantity within a reasonable time

05

Technical installation
Professional installation team on-site installation, commissioning to stable production

06

Post-maintenance
If you have any questions in the later stage, you can contact the after-sales engineer
Online Message

If you want to know the equipment model, configuration plan and other related information, you can leave your requirements. You can also contact us:+86 17398956111

Back to the top TOP