Get A Free QuoteProduct Introduction
The drying equipment is mainly composed of rotating body, lifting plate, transmission device, supporting device and sealing ring.
The heat source of the chicken manure dryer comes from the combustion device, and the chicken manure dryer adopts a downstream heating method. Therefore, the material that needs to be dried flows into the cylinder from the feed box and the feed, and then is pushed to the back end by the spiral plate. Due to the inclined placement of the dryer, on the one hand, the material flows to the back end under the action of gravity and rotation, on the other hand, the material is repeatedly picked up by the copy board, brought to the upper end and then continuously scattered down, so that the material forms a uniform curtain in the cylinder. The curtain fully exchanges heat with the hot air flow in the cylinder. As the material is repeatedly scattered, the moisture contained in it is gradually dried, so as to achieve the purpose of drying.
Performance Advantage
The chicken manure dryer adopts a new type of lifting plate device, which has multiple functions such as guiding, equalizing, and lifting, which can make the material uniformly distributed in the radial section of the dryer, and the material curtain becomes thin, uniform, and full. Fully contact the hot air flow to achieve the purpose of making full use of heat energy. The dryer selects reasonable operating parameters, the coal consumption and electricity consumption are generally reduced by more than 10-15%, and the output per unit is increased by more than 10-15%.
Equipment Pictures
Customer Site
Technical Parameter
| Specification（m） | Cylinder volume | Capacity | Installation slope | Max intake air temperature | Main motor | Total weight |
| (Diameter x Length) | （m³） | （t/h） | （%） | （℃） | （kw） | （t） |
| Φ1.2×8.0 | 9 | 1.9-2.4 | 3-5 | 700-800 | 7.5 | 9 |
| Φ1.2×10 | 11.3 | 2.4-3.0 | 3-5 | 700-800 | 7.5 | 11 |
| Φ1.5×12 | 21.2 | 4.5-5.7 | 3-5 | 700-800 | 15 | 18.5 |
| Φ1.5×14 | 24.7 | 5.3-6.6 | 3-5 | 700-800 | 15 | 19.7 |
| Φ1.5×15 | 26.5 | 5.7-7.1 | 3-5 | 700-800 | 15 | 20.5 |
| Φ1.8×12 | 30.5 | 6.5-8.1 | 3-5 | 700-800 | 18.5 | 21.5 |
| Φ1.8×14 | 35.6 | 7.6-9.5 | 3-5 | 700-800 | 18.5 | 23 |
| Φ2.2×12 | 45.6 | 9.7-12.2 | 3-5 | 700-800 | 22 | 33.5 |
| Φ2.2×14 | 53.2 | 11.4-14.2 | 3-5 | 700-800 | 22 | 36 |
| Φ2.2×16 | 60.8 | 13.0-16.2 | 3-5 | 700-800 | 22 | 38 |
| Φ2.4×14 | 63.3 | 13.5-16.9 | 3-5 | 700-800 | 37 | 45 |
| Φ2.4×18 | 81.4 | 17.4-21.7 | 3-5 | 700-800 | 37 | 49 |
| Φ2.4×20 | 90.4 | 19.3-24.1 | 3-5 | 700-800 | 45 | 54 |
| Φ2.4×22 | 99.5 | 21.2-26.5 | 3-5 | 700-800 | 45 | 58 |
| Φ2.6×24 | 127.4 | 27.2-34.0 | 3-5 | 700-800 | 55 | 73 |
| Φ3.0×20 | 141.3 | 30.1-37.7 | 3-5 | 700-800 | 75 | 85 |
| Φ3.0×25 | 176.6 | 37.7-47.1 | 3-5 | 700-800 | 75 | 95 |
| Φ3.2×25 | 201 | 42.9-53.6 | 3-5 | 700-800 | 90 | 110 |
| Φ3.6×28 | 285 | 60.8-76.0 | 3-5 | 700-800 | 160 | 135 |
| Indirect heat transfer dryer | ||||||||
| Cylinder diameter × Cylinder length | Inner diameter of outer cylinder (mm) | Inner cylinder inner diameter (mm) | Cylinder length (m) | Cylinder volume (m³) | Cylinder slope | Lifting plate type | Maximum intake air temperature (℃) | Dimensions (m) |
| Φ1.5×15m | 1500 | 500 | 15 | 20.27 | 3-5% | lift type | 850 | 16.2×2.7×2.7 |
| Φ1.5×17m | 17 | 22.97 | 18.2×2.7×2.7 | |||||
| Φ1.5×19m | 19 | 25.68 | 20.0×2.9×2.9 | |||||
| Φ1.8×21m | 1800 | 650 | 21 | 35.91 | 3-5% | lift type | 850 | 22.5×2.7×2.7 |
| Φ1.8×23m | 23 | 39.33 | 24.5×2.9×2.9 | |||||
| Φ1.8×25m | 25 | 42.75 | 26.5×2.9×2.9 | |||||
| Φ2.2×21m | 2200 | 800 | 21 | 58.1 | 3-5% | lift type | 850 | ---- |
| Φ2.2×23m | 23 | 63.61 | ||||||
| Φ2.2×25m | 25 | 69.15 | ||||||
TOP 
Email
Phone
Online