How to install the rotary kiln

The main function of the rotary kiln is to calcine chemical clinker, various metal substances and various refractory materials in the metallurgical industry, and its kiln loading density will directly affect the use of the equipment, so you need to pay attention to the kiln loading What, I will explain in detail next:

1. If the kiln is installed too densely, it will directly cause the airflow resistance in the kiln of the rotary kiln to be too large, which is not conducive to ventilation, and the temperature in the kiln will not be uniform.

2. The gap distance between the green body and the green body should be controlled at about 5mm. When loading the blanks, the shed board pillar structure is used to burn with open flame, and each shed board is supported by three pillars.

3. The upper and lower shed panels should be kept stable, straight and evenly arranged. The products of each layer need to be basically the same in height as possible, and the shapes and sizes need to be different.

4. When the whole vehicle is loaded, the relatively short blank should be installed in the middle of the equipment.

5. If the green body is high, it is necessary to place the long column on the top or bottom, which is conducive to maintaining the balance of heat of the green body of the rotary kiln in the environment of high temperature airflow, thereby shortening the firing time, to a certain extent Can reduce fuel consumption.

6. The blanks placed on the shed board need proper encryption when loading the blanks to prevent the air flow from being drawn away by the chimney due to too fast, which can improve the heat utilization rate.

When we use the rotary kiln, we need to take some measures to control the density of the kiln, so that we can control the internal temperature of the equipment and achieve the purpose of reducing the waste of raw materials.